Products
Every device in the plant is a current catalogue product. The families below group them by job. A page per product will follow.
Real devices, built from real data
Every machine and device in this twin is a real industrial product from the makers' catalogues. They range from sensors, valves and drives to safety scanners, load cells and RFID readers. Each model is built from the product's published data: dimensions, sensing ranges, signals, rated values, parameters and timing.
The PLC programs use the devices' real interfaces and parameters. Before any hardware existed, the twin found hundreds of faults in the plant design and the programs. So a real commissioning would need fine tuning, not a redesign.
The product families
Detection and measurement
Sensors that tell the PLC where things are and how the process runs.
- Inductive and capacitive sensors
- Photoelectric sensors
- Radar level sensors for bins
- Infrared pyrometers for hot metal
- Encoders and bar code tape positioning
Used in: Primary crushing and screening, Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower, Aggregate and building blocks
Identification
Devices that give every furnace load, ingot, bundle, drum and rack an identity.
- Radio tag read and write heads
- Radio tags on skids, drums, racks and ladles
- Dot-peen marking head for the ingots
- Print-and-apply labeller for drums
Used in: Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower
Safety
Devices that protect people at every machine and around every vehicle.
- Emergency stops and pull-rope switches
- Safety laser scanners
- Safety light curtains with muting
- Guard locking interlocks
- Safety bumpers
Used in: Primary crushing and screening, Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower, Aggregate and building blocks
Pneumatics and vacuum
Air-driven actuators for short, strong strokes, and vacuum for gentle picks.
- Compact cylinders with position sensors
- Valve terminals
- Pressure regulators and sensors
- Vacuum generators and suction cups
- Pneumatic grippers
Used in: Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower
Drives and motors
Everything that turns or moves, with safe torque off on every drive.
- Variable speed drives above 1.5 kW
- Compact drives up to 1.5 kW
- Geared induction motors
- 48 V servo drives and motors
- Motor starters
Used in: Primary crushing and screening, Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower, Aggregate and building blocks
Weighing and dosing
Weighing at every step, from the belt flow to each ingot and rack.
- Load cells of 50 kg, 200 kg and 1 t
- Canister load cells of 20 t under the ladle
- Belt scales
- Weigh hopper on the charging car
- Drum filling by weight
Used in: Primary crushing and screening, Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Pad loading tower, Aggregate and building blocks
Robots and handling
Machines that stack, strap, lift and move the products.
- Six-axis industrial robots
- Steel strapping machines
- Chain conveyors and transfers
- Tower elevator for 3,000 kg
- Block cuber
Used in: Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower, Aggregate and building blocks
Vehicles
Four vehicles, each with its own PLC and its own safety on board.
- Charging car with a weigh hopper
- Ladle car with load cells
- Driverless vehicle with a chain conveyor on top
- Battery rail cart with contactless charging
Used in: Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower
Control hardware
The controllers, inputs, outputs and operator devices of every area and vehicle.
- Embedded industrial computers as PLCs
- Fieldbus couplers and terminals
- Safety logic terminal
- Industrial wireless clients and access points
- Push buttons and stack lights
Used in: Primary crushing and screening, Dry magnetic separation, Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower, Aggregate and building blocks
Power supply
Power for the furnaces, the vehicles and the weighing circuits.
- Furnace power units, 2 x 3,000 kW
- 48 V vehicle batteries
- Contactless charging at the docks, 3 kW
- 24 V converters on the vehicles
- Motorised cable reel
Used in: Induction melting, Chain ingot casting, Ingot bundling and strapping, Residue drum filling and palletising, Cargo rack loading and weighing, Launch yard and cargo set staging, Pad loading tower